mAx Team character Bruce B Upgrade for 3D SETS Family - Ann & Bruce
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Transform your 3D SETS Family - Bruce as a character of your 3D SETS Model 14 mAx Team van with a 1 color 3D printer
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 71
- Wydruki
- 1
- Wyświetlenia
- 547
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Warning
It is small parts (especially for this character), it is working on my side but sometime according your printer and your setting it could provide a poor result.
Definition
None.
Printing
Is required the same printer size than 3D SETS has defined.
See pictures to find the faces which should be on the bed.
Infill 15% and layer 0.15mm is fine.
I had used support for the barbe, but it works without support with 0.05mm layer (but the result is not the best)
Build
Use 3D SETS Family universal connector.
No screw, may be some glue could be fine.
Feedback
It is welcome.
Remark
The barbe can be used (with glue it is better) for the Bruce and Bruce S head; it could be used for Bruce P head if you cut some parts.
Version
v1/v20230129 1st upload.