5/8x24 Thread Protector, Standard (0.62" L x 0.8" OD)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the standard length version of my 5/8x24 muzzle thread protector. Depending on manufacturer, most 5/8x24…
- Ocena
- 5 / 5
- Polubienia
- 12
- Pobrania
- 421
- Wydruki
- 1
- Wyświetlenia
- 1027
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is the standard length version of my 5/8x24 muzzle thread protector. Depending on manufacturer, most 5/8x24 muzzle threads are 0.6" to 0.62" long, this protector is 0.62" long.
Prints fine with either 0.2 mm or 0.15 mm layers, although the latter is probably a little tighter.
Obviously PLA and even PETG could deform and melt during extended firing, but I just use this protector to keep my threads from getting dinged during transport and storage, a suppressor is generally mounted for all shooting.
With 2-3 perimeters, this thread protector will print solid.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.15 mm or 0.2 mm
Filament:
Overture PLA+Green
Category: Sport & Outdoors