Clutch Pedal Stop for Porsche
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on a design from the 718 Forum dot com. Uses more triangles to fit snugly and more surface area for strength.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 87
- Wydruki
- 0
- Wyświetlenia
- 567
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
The clutch throw in my 718 is too long. The dealer bled the clutch master and adjusted it, and still the engagement is way at the top of the throw. Over on the forums it was suggested that a simple pedal stop could keep you from going all the way to the floor and make your shifts smoother. Basically take away the bottom end of the throw. This may or may not work for you. This may allow the clutch to still be engaged. Please use and modify at your own risk. Print in a strong PETG or better filament. I used a .6 nozzle with 40% grid infill at 0 degrees.