Newton's Cradle frame and legs
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the frame for a Newton's Cradle project for my daughter's physics class. We did it on the 3D printer instead…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the frame for a Newton's Cradle project for my daughter's physics class. We did it on the 3D printer instead of using popsicle sticks.
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
No
Supports:
No
Resolution:
.3mm
Infill:
15%
Notes:
Print the frame, four (4) legs and four (4) bases.
The pieces should press-to-fit together. You may need a tiny bit of sanding to knock off the sharp corners on the legs before inserting into the frame and bases.
The materials (balls, wire, etc.) and instructions to complete the Newton's Cradle can be found elsewhere on the internet.
The Frame.stl model is spaced for 7/8 inch balls. The file Frame-1in.stl is spaced for 1 inch balls.
Category: Physics & Astronomy