10 Sided Dice holder V2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really liked the idea of the dice holder model from Xavier Marquet https://www.prusaprinters.org/prints/36374-dice-…
- Ocena
- 4,5 / 5
- Polubienia
- 42
- Pobrania
- 241
- Wydruki
- 3
- Wyświetlenia
- 1673
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
I really liked the idea of the dice holder model from Xavier Marquet
https://www.prusaprinters.org/prints/36374-dice-holder
But with my friends, we mainly use 10-sided dice. So I decided to create my own model of 10-sided dice holders.
This is the second version of the "10 sided dice holder" and this one requires no extra parts :)
To close or open the box you just have to slide in or out the face with the number 9.
You can see the first version which requires magnets by clicking on the link below:
https://www.prusaprinters.org/prints/37934-10-sided-dice-holder-u1
Feel free to tip me or to follow me on Instagram if you like my work :)
Print instructions
-Layer height: 0.2mm
-Infill: 10%
-Support: Not needed