Ender 3 S1/S1Pro Isolation Feet Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2 Part mount for the Hudson Hi-Fi 1.5” Bigfoot Isolation Feet.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 902
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I created these mounts to fit the Hudson Hi-Fi 1.5” Bigfoot Isolation Feet as I found that when using the squash balls, the squash balls would get squashed too much and most of the weight was at back which created a slight tilt backwards of the entire printer.
I find these are a lot more sturdy despite being much larger.
I created this using a 2 part Design for ease of printing.
- 1 full set (top & bottom models together) requires the below per set:
Combining both top and bottom:- 3x M3 (Flat Head) Screws 12mm
- 3x M3 Hex Nuts
- Mounting to Printer frame:
- 1xM5 Hex Screw 18mm (16mm will work)
- 1xM5 T-Nut
3D PRINTING SETTINGS
Material: PLA
Infill: 20%-25%
Perimeters: 3 (min recommendation)
Layer Height: 0.2mm (0.24mm for First Layer)
Speed : Print at the speed and acceleration you prefer (I printed at 65mm/s default. 25mm/s First layer and small perimeters)