1 / 7
Harting Han B to Anderson PowerPole (APP) plate — zdjęcie 1
1 / 7

Harting Han B to Anderson PowerPole (APP) plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An adapter plate to add an Anderson PowerPole (APP) to a Harting connector

Ocena
0 / 5
Polubienia
8
Pobrania
37
Wydruki
0
Wyświetlenia
807
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

 

 

I picked up a Pelican Case (iM2500) that I've seen at many surplus stores:
 

These cases were used to transport Mechanical Ventilators during the pandemic. Good news for us is you can get a really good price on a Pelican iM2500. 

However is has been modified. A Harting Hans B connector has been added to the side.


 

 

I have a few project in mind for this case and one of them require getting power in to the case.  I figured since there was already a hole, why not use it?

I designed up a plate that will hold one or two pairs of Anderson Powerpole connectors (15-45a)

Printed with PETG .2mm layer. 

I printed the Tight Fit versions and they worked perfectly. I included a version with an extra .2mm in case it's too tight on your printer.

I used an M2.5x16 screw to hold the APP in place.  I used four M3x8 screws to attach the plat to the Harting Connector.