PowerSlide Flying Model Rocket - INVERTED PURSUITS LAB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Powerslide is a 54mm model rocket.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 108
- Wydruki
- 2
- Wyświetlenia
- 1042
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Please Fly under the supervision of a Certifying Rocketry Association such as TRA/NAR/CAR/UKRA
This rocket is well equiped to serve as a L1 certification rocket within these organizations
Powerslide is a 54mm rocket flying on 38mm Hobby rocket motors.
Reccomend printing in PETG or ASA
Reccomended Body Tube Length of 30in
Additionally Requires
- 54mm Phenolic/Fiberglass Body Tube
- 54mm Nose Cone (3D printed NC avaliable from IPL: https://inverted-pursuits-lab.square.site
- 38mm Phenolic Body Tube (Used as liner in motor tube)
- Rail Hardware such as RailButtons will also be required: https://rail-buttons.com/ocart3/
Fin Can assembly similar to SCREWBALL Rocket. Instructions Here: https://inverted-pursuits-lab.square.site/downloads
Open Rocket File included for simulation work. Please ensure simulations show your rocket is stable before attempting to fly
I am not liable for inappropriate or general misuse of these files!
Certifiying Rocketry Associations are as follows:
TRA - Tripoli Rocketry Association
NAR - National Association of Rocketry (USA)
CAR - Canadian Association of Rocketry (Canada)
UKRA - United Kingdon Rocketry Association (UK)