OpenAstroGuider v3 Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an easier dust cap for the OpenAstroGuider v3…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an easier dust cap for the OpenAstroGuider v3 (https://wiki.openastrotech.com/OpenAstroGuider/OpenAstroGuider). The official one is much nicer, but much more challenging to print and stay in place.
It's a spring-loaded clamping mechanism that any moderately-calibrated printer will be able to do.
It's 100% parametrically designed, and it fits a specimen printed by the official OAT store (57.8mm external diameter). Let me know if you need a specific change, and I'll happily make it available for all.
I also thought of doing a pressure fit with a conical interior section, but then again, that'd need small tolerances. Let me know in the comments if you have a design suggestion.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%, not too relevant
Filament: Hatchbox PLA Irrelevant
Notes:
.
Layers create a lot of friction. Sanding the clips' internal face is ideal, bur very tricky. A simple piece of tape will ensure smooth sliding.
Category: Robotics