Mechanical randomizer Dice or Fortune
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I slapped this machine together yesterday afternoon to further demonstrate the great potential of filament springs.
- Ocena
- 5 / 5
- Polubienia
- 95
- Pobrania
- 338
- Wydruki
- 2
- Wyświetlenia
- 7928
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
I apologize for the print quality, I did this very fast just for demonstration. I didn't even level my bed.
I have never seen anybody using filament springs but I believe it has a great potential for mechanical models.
Try it out! Making the spring need some practice, don't be discouraged!
Filament hinge holds the device together.
No support needed, 0.2 layer height is good.
The spring you make should be around 45 mm, if you fill out the spring guide provided it should fit perfectly.
I will make an upgraded design for my Patreons.