Bambu Lab X1 and P1P LED Shield Ventilated Top Glass Riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimalist top glass riser with added ventilation slots and TPU Light Shield, which will support 8 or 10 mm LED's.
- Ocena
- 4 / 5
- Polubienia
- 184
- Pobrania
- 814
- Wydruki
- 6
- Wyświetlenia
- 12 484
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Fast and functional remix of these two projects:
https://www.printables.com/model/348616-bambu-p1p-and-x1-sliding-vent-glass-top-enclosure-
https://www.printables.com/model/365027-bambulab-top-glass-riser-4-cob-led-remix-with-led-
Added a front cable slot if you want to connect an usb led to the P1P usb port like in the photo.
For P1P USB port only use a 5V LED and do not excess the 1.5A of the port, i used and cutted a LED strip like this one:
For full enclosure is better to print it in petg, abs or asa.
Personally used PETG for the structure and TPU for the light shield with the following variation to the standard 0.2 setting in Bambu Studio to apply only for the structure:
Infill: 10%
Support: No supports
Brim: manual, 10mm
Thanks to the original authors!