1 / 4
TAC-01 Control Box Ender 3 and Voxelab Aquila Board Mount with Raspberry Pi Options — zdjęcie 1
1 / 4

TAC-01 Control Box Ender 3 and Voxelab Aquila Board Mount with Raspberry Pi Options

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An external mounting easy to edit box for the board on ender 3 and voxelab aquila and raspberry pi boards

Ocena
0 / 5
Polubienia
10
Pobrania
83
Wydruki
0
Wyświetlenia
804
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

A case for ender 3 and voxelab aquila boards! Raspberry Pi option as well! I will try and work on a pi zero version soon too, but you can also edit it yourself! More details and Tinkercad links available in the following article! 
https://www.homegrown3d.com/2023/02/02/tac-01-control-box-board-mount-for-ender-3-and-voxelab-aquila-printers-available-now/
 

Uses brass M3 threaded heatset inserts to mount the board, the top, and the fan
I use these inserts for most things https://amzn.to/3WDwYqw

It uses M3 screws to mount the board, the fan, and the top. 
I also use these socket head m3 screws for most things.  https://amzn.to/3Z50Qy3  


It uses M5 screws and t nuts to mount the board to extrusion. 
(I don't use these for many things yet but I think I might use them for the enclosure design I am working on in the future. TBD.) 
10mm M5 screws https://amzn.to/40gk5Ft
T nuts https://amzn.to/3HiD4a4


I recommend cutting the tinned ends off of power supply and heater wires and using ferrules. You will need to strip the wire a little bit and wire strippers are advised, but you can also use your clippers that come with your printer. 
I personally use this crimper and ferrule kit. https://amzn.to/3RlBLLX

If you are looking for something to help manage your moving wires, I like this half inch split loom and use it for the TAC-01 build and wire management parts that I will be releasing. 
https://amzn.to/409A0Wl

 I am looking to grow my new channels! Give me a follow on youtube and mastadon! and please feel free to say hello :)

https://www.youtube.com/@homegrown3dprint

 https://mastodon.social/@homegrown3d

Tagi