1 / 3
Lego Porsche GT3 RS 42056 wall mount — zdjęcie 1
1 / 3

Lego Porsche GT3 RS 42056 wall mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,36 € – 1,66 € netto (bez VAT)

Dla pliku: 42056_wall_mount_0.15mm_PLA_MINI_1h42m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,51 € netto (środek widełek).

Masa podana przez autora
15 g
Czas druku podany przez autora
1,69 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

A simple wall mount for the LEGO 42056 Porsche GT3 RS.

Ocena
4,75 / 5
Polubienia
56
Pobrania
582
Wydruki
5
Wyświetlenia
3946
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Wall-mounted
Licencja
Creative Commons — Attribution

User named Weylandyutani from Thingiverse created a simple wall mount for the LEGO 42056 Porsche GT3 RS. It clamps on a pretty strong point on the chassis (see the red arrow on the last picture).

Depending on the hardware you'll use to screw the mount to the wall you might need to file down the chamfer so that the screw is flush (otherwise you won't be able to slide the model in)

Tagi