Creality CR-100 alternate Spoolholder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remodeled the original CR-100 spoolholder to accept larger diameter spools.
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 64
- Wydruki
- 1
- Wyświetlenia
- 519
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Remodeled the original CR-100 spoolholder to accept larger diameter spools. Print with support and the smaller part pointing down. Use enough shells and infill so the link between both parts is strong enough (small connecting area!). The slopes on the large part to hold the spool in place don't need support.
I suggest to print 4 of the m3 standoffs aswell and move the whole extruder assembly ~5mm outwards so the filament doesn't rub against the spool wall under tension. See last picture.
Print instructions
Category: 3D Printer Parts Summary
Remodeled the original CR-100 spoolholder to accept larger diameter spools. Print with support and the smaller part pointing down. Use enough shells and infill so the link between both parts is strong enough (small connecting area!). The slopes on the large part to hold the spool in place don't need support.
I suggest to print 4 of the m3 standoffs aswell and move the whole extruder assembly ~5mm outwards so the filament doesn't rub against the spool wall under tension. See last picture.
Print Settings
Printer Brand: XYZprinting
Printer: da Vinci Jr. 1.0 Pro
Rafts: Doesn't Matter
Supports: Yes
Resolution: 0.2mm
Infill: 35%, 3-4 shells
Filament: DAS FILAMENT PLA weiss matt / schwarz matt (white / black mat)