1 / 6
3D Sets Rancher Model 1 Stand
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand that supports the Rancher Model 1 in the middle Chassis and clears the linkage. May fit other 3D sets, but I am…
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 69
- Wydruki
- 1
- Wyświetlenia
- 399
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (23)Powiązane
Stand that supports the Rancher Model 1 in the middle Chassis and clears the linkage. May fit other 3D sets, but I am not 100% sure what their center chassis look like.
You will need (8) M3 screws no longer than 12mm but long enough to connect the pieces. I used M3x12mm screws.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.2mm
Infill:
10
Filament: Overture PLA Silk Any
Category: R/C Vehicles