Hanging spool holder (2 piece, entirely printed)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool holder for 1 or 2kg spools, made from 2 pieces and entirely printed, to hang from a (up to 30mm) closet-bar
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 62
- Wydruki
- 2
- Wyświetlenia
- 279
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Hi Maker!
I designed another spool-holder to hang from a wardrobe-tube (up to 30mm in diameter).
I used this design by Thingiverse User "RockstarTS" as inspiration.
My initial design fits a variety of 2kg spools up to a safe width of about 119mm and a diameter of about 300mm max and should be suitable to use with a variety of spools including the 2.3/2.5kg Extrudr spools.
I also created a thinned down version for 1kg spools up to a usable spool width of 68mm, so most standart spools should fit.
Spools with a inner diameter of >40mm should work.
I printed the model shown in (eSun) green translucent PETG to avoid creep.
For some strength I used these settings (the Bambu-Studio strength profile):
0.2 layer height
6 walls
25% infill
In hindsight this was a bit of a overkill, you should be fine with 3 perimeters.