3DJake Vacuum Clip Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip holder for vacuum pump This clip holder attaches to the vacuum pump for the air-sealed bags sold by 3Djake.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Clip holder for vacuum pump
This clip holder attaches to the vacuum pump for the air-sealed bags sold by 3Djake.
I kept loosing the clip that closes the bags tightly shut, so I made a holder that
Made for Vacuum pumps with diameter of about 33-34 mm.
I think this pump is a generic rebrand sold by others - your non-3djake pump will most likely be the right dimensions as well
Assembly
A bit of glue will attach the holder to the pump. I used standard superglue.
Use a small bit of 1.75mm filament to create the 'washing line' in which to click the clip holder. (See picture)
Category: Parts