Holder / mount for Festool EX-UNI and AN-UNI attachments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder/mount for Festool EX-UNI and AN-UNI attachments
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 279
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
Holder/mount for Festool EX-UNI and AN-UNI attachments. Fixing with outer blue ring. You can print without supports, but to get a perfect fastening, just consider to add supports as in the attached picture.
I suggest printing with ABS or at least Nylon because the latch is made of very thin plastic and can easily be damaged if printed with PLA or PETG. Three external walls minimum and 25% of infill.
For everyday use in the workshop, you can consider printing in metal, e.g. on JLCPCB, the cost is about 25$.
Rafts: No
Supports: Preferred
Resolution: 0.2 SPEED is enough
Infill: 25%
Material: ABS, Nylon, Metal