Fractured Ashla Concept Saber SWTOR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Concept Saber Model from SWTOR
- Ocena
- 5 / 5
- Polubienia
- 48
- Pobrania
- 141
- Wydruki
- 2
- Wyświetlenia
- 856
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution
NOTES: Pins are only meant for proper alignment purposes while gluing,
do not try and and pull pieces apart after pushing together as the pins
might shear off on printers with a low tolerance.
Pins are printed with .5mm clearance so for tightly tuned machines it might seem loose
but the three points of contact will allow for easy alignment while assembling.
Opening at the top fits a 1" dowel rod
Only the Emitter Top and Emitter Base should need supports
Handle was left blank intentionally to allow the addition of leather/cloth hand grips
Based on artwork found here https://www.artstation.com/artwork/9mnVGN