MPMD Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I replaced the 5A PSU with a 10A Meanwell one, which I mounted to the back, which got in the way of the included filament holder. I designed this to use the existing screws from the top handle and holes, while also adding in a filament guide.
Unfortunately cannot be printed on the MPMD, but works amazingly.
Print instructions
Category: 3D Printer Parts Summary
I replaced the 5A PSU with a 10A Meanwell one, which I mounted to the back, which got in the way of the included filament holder. I designed this to use the existing screws from the top handle and holes, while also adding in a filament guide.
Unfortunately cannot be printed on the MPMD, but works amazingly.
Print Settings
Printer Brand: FlashForge
Printer: Creator Pro
Rafts: Doesn't Matter
Supports: No
Resolution: 0.21mm
Infill: 15% hex
Filament: CC DIY ABS Grey
Notes:
Will work with pretty much any filament, but had solid results with ABS.