DL-44 Flash Suppressor Threaded for 1/2" x 28
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DL-44 Flash Suppressor Threaded for 1/2" x 28
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 277
- Wydruki
- 0
- Wyświetlenia
- 1435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
A replica of the muzzle device on Han Solo's DL-44 Blaster. It is set up to work with 1/2" x 28 threads. it will thread onto AWCY's Proto Barrel ends (available elsewhere). Either the "One Part Option - Permanent" or the “Two Part Option - Interchangeable” as long as you choose the 1/2" x 28 version.
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 100
NOTE: While this originally called for supports I printed it without. It worked and required far less post-print processing than it would have with supports. Unfortunately I printed this the day before Prusa Slicer 2.6 was released. If I were to re-do this I would try a support blocker running through the threads and organic supports off the plate only.
An AR style DL-44 grip can be found here.