1 / 1
Hop Up Arm / nub Airsoft for JG (TM Clone) VZ61 Scorpion — zdjęcie 1

Hop Up Arm / nub Airsoft for JG (TM Clone) VZ61 Scorpion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a hop up arm I modeled from the stock arm on my JG VZ61. Should help with adding aftermarket buckings

Ocena
0 / 5
Polubienia
6
Pobrania
52
Wydruki
0
Wyświetlenia
683
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

This is a direct replacement and modification for the hop up arm on the Tokyo Marui VZ 61 Scorpion AEP and it's clones (JG, Well etc).  This part is tested and working in my JG.  

 I have modeled several different nub sizes for various amounts of hop (including a flat version if you wanted to try and flat hop / r hop your Scorpion).  The 1.5 mm radius nub is the replacement to stock. May require a small amount of sanding for smooth rotation in the hop unit. 

I printed these on my Saturn 2 Resin printer with a 75/25 mix of Siraya Simple and Siraya Blu.  I have not tested this on my Ender 3 but if you have really tight tolerances or a 1.5mm drill bit for the pin hole it might work for FDM.    Pre-supported .ctb included!

 

Donations welcome: 
https://buymeacoffee.com/bulgogi19
 

Tagi