Manta MK2 Rigid Mounting Adapters for Dragon/Dragonfly Hotends
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 10/26/21: Added duct base for Ender 5 version Rigid mounting adapters for Triangle Labs Dragon/ Phaetus…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Update 10/26/21: Added duct base for Ender 5 version
Rigid mounting adapters for Triangle Labs Dragon/ Phaetus Dragonfly hotends and Manta MK2 Fan Duct system. Advantages over the standard v6 grove mount:
- Higher acceleration values possible with Klippper's Input Shaper as there is much lesser play
- One handed nozzle changes possible with the Dragon hotend. (Not recommended with the dragonfly hotend as the only structural support is the thin heatbreak tube)
- Added a PC4-M6 coupler to better retain the bowden tube. (Use a pass through coupler like this one. Regular ones will not work as the tube wont be able to pass through)
Need the new duct base (choose the ender 3 or the ender 5 version as appropriate) and fan shroud to go along with the adapters. Make sure to assemble in order
- Use the provided M2.5 screws with either hotend to attach the adapter first
- Slide in the adapter + hotend assemble from the bottom up into the fan shroud
- Screw in the PC4-M6 Coupler from the top using an M10 socket wrench
This will ensure a rigid fit and the whole assembly can now be slid into the duct base as per the original installation instructions
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
42%
Filament: Duramic PETG White Post-Printing =============
One handed nozzle change with the Dragon Hotend
Category: 3D Printer Parts