1 / 3
Skadis Dual Bottle Holder - Fit for bSi Maxi-Cure & Insta-Set
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to keep my bottles handy and together on my Skadis board.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 42
- Wydruki
- 1
- Wyświetlenia
- 237
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (18)Powiązane
Print with supports for the Skadis hooks.
Use >20% infil for strength. It's a tight fit, but did not need any filing to fit the Skadis board. I resized the Maxi-Cure slot after printing the test model to loosen up the tolerance a bit.