Spüle Erweiterung Deluxe / Sink Extension Deluxe / Drainer / Kitchendrainer / Ablage /Cutlery
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eine Erweiterung für die Küche um den Platz beim Abspülen besser zu nutzen
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 180
- Wydruki
- 1
- Wyświetlenia
- 1914
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
UPDATE 01.03.2022:
Alternativ für gerade Oberflächen habe ich noch die vier Fußteile abgeändert und hinzugefügt.
Zusätzlich habe ich noch Befestigungsklammern für den Korb hochgeladen für zusätzliche Stabilität.
Alternatively, for straight surfaces, i also modified the four footparts and added them here to download.
Additionally, I uploaded mounting brackets for the basket for added stability.
----
Da der Platz hinter der Spüle in der Küche so schlecht genutzt wird, verdreckt ist und immer das Wasser steht hat meine Freundin das hier gezeichnet. Es besteht aus vier Modulen die aneinander gehängt werden.
Wichtiger Hinweis: Die Modelle werden auf einer geraden Fläche nicht gerade stehen. Diese sind dafür ausgelegt zu einem Teil in der Spüle zu stehen da dort der Untergrund nicht Gerade ist.
Die linken beiden (A1 und A2) sind eine Erweiterung für den Abtropfbereich optimiert für Schneidbretter.
Das Modul ganz Rechts (B2) ist für Schwämme, Spülmittel und ähnliches. Das Modul links davon (B1) für Bürsten und sonstiges.
Die Module können eigenständig verwendet werden oder wie im Bild im Verbund zusammengesteckt.
Die Basisplattform eines jeden Moduls ist für eine Standardeinsatzspüle so wie wir sie haben optimiert. Es ist so konstruiert das die Module etwas tiefer sind und somit etwas in die Spüle überstehen damit das Wasser in die Spüle laufen kann. Die füsse sind so optimiert das diese auch noch in der Spüle selber halt finden.
Gedruckt habe ich es in PLA Infill mit 15%.
Der einzige Support der benötigt wird ist an den Fußteilen vorne. Hier liegt die Ablage schräg auf. In den hochgeladenen G-Codes enthalten.
Als Zubehör, ob Teil davon zum drauf stecken oder eine weitere eigenständige Erweiterung, soll es einen art Besteckkorb geben in den man das Besteck aufrecht rein stellen kann und das Wasser so auch abläuft. Somit fliegt das Besteck nicht immer Rum.
Es wird noch eine weitere Erweiterung kommen die aber ein alleinstehendes Modell sein wird für Messer. Die sollen an eine Halterung an der Wand gesteckt werden können.
ENGLISH:
Since the space behind the sink in the kitchen is so badly used, is dirty and always the water stands my girlfriend has drawn this. It consists of four modules that are hung together.
Important note: The models will not stand straight on a flat surface. They are designed to stand partly in the sink because the surface there is not flat.
The left two (A1 and A2) are an extension for the draining area optimized for cutting boards.
The module on the far right (B2) is for sponges, dishwashing liquid and similar stuff. The module to the left of that (B1) is for brushes and other stuff.
The modules can be used independently or plugged together as shown in the picture.
The basic platform of each module is optimized for a standard insert sink as we have it. It is designed so that the modules are slightly deeper and thus protrude slightly into the sink so that the water can run into the sink. The feet are optimized so that they still find support in the sink itself.
I have printed it in PLA Infill with 15%.
The only support needed is at the front of the footrests. This is where the tray rests at an angle. Included in the uploaded G-codes.
As an accessory, whether part of it to put on it or another independent extension, there should be a kind of cutlery basket in which you can put the cutlery upright purely and the water so also runs off. Thus the cutlery does not always lay around and get broken in the sink.
There will be another extension that will be a stand-alone model for knives. They should be able to be plugged into a holder on the wall.