Niterider Solas seatpost mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement seatpost mount for a niterider Solas USB taillight.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 577
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a replacement seatpost mount for a niterider Solas USB taillight. My original mount broke, and I needed a replacement. The clamp is intended for larger seatposts (30.9mm) but will fit smaller posts with rubber shims.
Hardware needed:
M3 x 10mm Socket head cap screw
M3 lock nut (preferred) or M3 standard hex nut
M4 hex nut
Original seatpost clamp knob or M4 x 24 SHCS
I included Solidworks 2017 files for your remixing fun.
Print instructions
Unassociated tags: bicycle seatpost, bike tailight, seat post, seatpost clamp, tail light
Category: Sport & Outdoors Summary
This is a replacement seatpost mount for a niterider Solas USB taillight. My original mount broke, and I needed a replacement. The clamp is intended for larger seatposts (30.9mm) but will fit smaller posts with rubber shims.
Hardware needed:
M3 x 10mm Socket head cap screw
M3 lock nut (preferred) or M3 standard hex nut
M4 hex nut
Original seatpost clamp knob or M4 x 24 SHCS
I included Solidworks 2017 files for your remixing fun.
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 30%
Filament: Prusa PETG Black
Notes:
I used PETG for toughness, nylon would probably work even better.
All parts print OK without support if you orient them correctly.