1 / 4
GT2 625zz idler TronXY X5SA — zdjęcie 1
1 / 4

GT2 625zz idler TronXY X5SA

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Made a printable copy of the injection molded plastic idler bearings on the TronXY X5SA

Ocena
0 / 5
Polubienia
11
Pobrania
78
Wydruki
0
Wyświetlenia
581
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Decided i didn't like the injection molded sleeves on the idlers for the TronXY X5SA so I made the printable version to include the ridge that is in the center that keeps the sleeve from sliding up or down the bearings during use. Nice snug fit to prevent axial slipping as well.
Printed with PETG for slight flex as bearings are press fitted with their original 1mm metal spacer internally. also included slight taper top and bottom to help it self center instead of grinding the belt against it if it's not entirely straight

 

Tagi