Additions to the Small fully-printable modular Vermicomposter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A couple of things to help keep the worms from drowning themselves
- Ocena
- 5 / 5
- Polubienia
- 26
- Pobrania
- 166
- Wydruki
- 2
- Wyświetlenia
- 1108
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Hello,
Worms are happily doing their thing, but the holes in the bottom of the first level are big enough they they keep falling through.
Item one is a frame over which I stretched out an old stocking, does a great job of letting the worm tea through…but not the worms.
I printed one for the filter, and a couple more to help stabilize the bin.
Item two is an insert that can be put in the bottom of the first layer with much smaller holes. Just done printing it, but am pretty sure it will keep them where they belong.
On slicer I used a shape to keep from making perimeters around all the holes, cut way back on printing time and seems to be just fine.
Good times with the worms.