V6 / Dragon + V6 Plus adapter silicone sock mold
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Its a silicone sock mold for A V6 heater block + a mellow V6 plus hotend adapter.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 467
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I couldnt find any mold model for this hotend combination, so i quickly put together one. I am not experienced in mold making and I skipped a lot of steps from the cnckicthen video i watched about it, so it might not be the best, but i made it twice and it worked out both times.
On the bottom there is a hole where a vent is, that was intented for an rtv tube which i couldnt use, but it worked out good as a vent hole. The bigger hole on the bottom may be better closed, but it was fine being open, so i didnt bother with it.
It was designed for PLA and only tested with that.
What you need:
-4pcs m3x40 (or longer) screw
-2pcs m3x8(or slightly longer should be fine aswell)
-6pcs M3x4(Lenght, longer is fine aswell)x5
V6 plus adapter:
M3x4x5 Heatset insert (6pcs):