1 / 6
Sovol SV 06 Filament Runout Sensor mount — zdjęcie 1
1 / 6

Sovol SV 06 Filament Runout Sensor mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sovol SV 06 Filament Runout Sensor mount + high version

Ocena
0 / 5
Polubienia
14
Pobrania
120
Wydruki
1
Wyświetlenia
1013
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I raised the sensor because with other versions it interfered with higher prints

it is made for a regular filament sensor, I advise you to use only the top screw, not too tight to allow it to rotate with the filament 

V2 - even higher version to be able to use the entire height of the printer without interference and also works as a filament guide

maybe it's a good idea to put a bit of hot glue on the cables that connect to the sensor so there won't be any glitches with the sensor's movements

you need:

1 X:  M3 brass hot melt insert nuts (optional) 2x

1 X:  M3 x 20mm screw (optional) 2x

Tagi