Ender 3 Linear Rail Upgrade (No modifying of existing parts)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A linear rail upgrade for the ender 3 that was designed to require as little aditional hardware as possible.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 2516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A linear rail upgrade for the ender 3 that was designed to require as little aditional hardware as possible. There's no drilling, cutting or modifyning of the stock parts and all of the metal plates and brackets are still used. As well as the stock belt.
Video guide:
You need:
MGN12H linear rail 300mm. (Might work with some other ones not sure)
4 m5 lock nuts
4 m3 lock nuts
4 m5x12
4 m3x12
8 m3x8 (4 for the sliding block and 4+ for the rail attachment)
4+ m3 t nuts to attach the rail
NOTE
This upgrade can only be performed on the early ender 3 models with the offset holes in the y axes gantry plate. (The weels are further back on one side than the other.)
Happy making!
Print instructions
Printer:
LGMaker V2
Rafts:
No
Supports:
Yes
Resolution:
01-0,3
Infill:
30%
Filament_brand:
Esun
Filament_color:
white
Filament_material:
pla+