1 / 2
4.9mm and 4.77mm peg diameter, for pre-drilled shelf supports.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf supports for a pre-drilled shelf.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 79
- Wydruki
- 1
- Wyświetlenia
- 318
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (0)Kolekcje (26)Powiązane
Needed some shelf supports for a pre-drilled shelf. Nothing fancy, just learning 3D printing & design. There were some already out there, but I'm learning and wanted to build it myself.