Linear rail Bed mount Tronxy xy2 pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
LEVRIERO BED MOUNT EDIT I'm going to upgrade this part by adding a belt blocking system in order to keep the belts as…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
LEVRIERO BED MOUNT
EDIT I'm going to upgrade this part by adding a belt blocking system in order to keep the belts as low as possible
This mount uses 350mm MGN12H linear rail.
You can use the same bolts and nuts from the stock mount.
to home the axis use the bolt of the carrier and remember to put some duck tape on it to prevent shortages.
You might need to adjust the position of the end stop (if you need i also made a new end stop mount https://www.thingiverse.com/thing:5262750 )
it mounts in the same bed carrier holes and in the position as shown in the picture.
Made for Tronxy XY 2 Pro
Print Settings
Printer:
Tronxy XY 2 Pro
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.15mm
Infill:
at least 40%
Filament:
Eryone PETGGlitter Blue
Notes:
- Use a brim (4mm) for the best adhesion, 220° print temp 80° bed temp
Category: 3D Printer Parts