SRT hydraulic Brake pedal P1 Sim racing v5.2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New version available : https://www.thingiverse.com/thing:4552070 Presentation video in english…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 674
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution
New version available : https://www.thingiverse.com/thing:4552070
Presentation video in english : https://youtu.be/JDuevaOuTfM
Vidéo de présentation en français : https://youtu.be/cpyjCQfUd9Y
English :
https://lebois-racing.fr/srt-brake-pedal-p1
I printed the master cylinder support A at 60%... it doesn't move... If print quality is ok, around 40% could be enough for the HEAVY DUTY version.
I printed the lever at 100%. It's very stiff, and I didn't manage to break it with my foot. Maybe 80% is acceptable. Support needed.
The foot plate : https://www.thingiverse.com/thing:4098752
French :
https://lebois-racing.fr/pedale-de-frein-hydraulique-srt-f1
J'ai imprimé le support de maître cylindre A à 60% et ça ne bouge pas. Si l'imprimante est bonne, 40% pourrait suffire pour la version HEAVY DUTY.
J'ai imprimé le levier à 100%, c'est très rigide, et je n'ai jamais réussi à le cassé. 80% pourrait suffire. En dessous, ça doit rester suffisamment résistant, mais commencer à avoir un peu de flexion. Supports nécessaires.
La plaque de contact avec le pied : https://www.thingiverse.com/thing:4098752
Print Settings
Notes:
The lever takes a lot of time to print. Please ensure that your printer is in a good shape, and keep watch on it.
It oftens harm my printer to do so long print, mainly due to the heater overheating the PTFE tube. So please consider to clean the fans before to start to print.
Category: Video Games