Arm Kirby
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was printing weird Kirbies for friends, and when I ran out of existing models I decided to splice one together…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 1013
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I was printing weird Kirbies for friends, and when I ran out of existing models I decided to splice one together myself and got this handsome gentleman.
May he be with you always.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
0.1 - 0.2
Infill:
15%
Filament: PLA, ABS
Notes:
Can be printed at 0.1mm or 0.2mm layer heights (or anywhere in-between) easily. Most optimal angle to print is 25 degrees backwards, it allows the face to print really well and without any support material on it (supports still needed for the rest of the body obviously).
