Demon Skull - with cut horns - Fridge Magnet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Want to modify a design and don't know how. We can help and often work for free, email us to ask.
- Ocena
- 0 / 5
- Polubienia
- 20
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 940
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial
Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom
I had the idea that I wanted to test my new Prusa Azure Blue filament.
I downloaded the skull from somewhere(very sorry that I can't recall where), simply had to slice the back of at he desired angle and make a hole for a magnet.
I have updated it since then to add the cut off horns as pen/pencil holders and the pentagram I thought added a nice character to it.
I have a Prusa Black with metal flacks that I am going to print it in next.
The magnet cavity is 21mm wide x 52mm tall x 6mm deep.
I made it to fit a magnet I had lying around.
Print instructions
Category: Decor Summary
Want to modify a design and don't know how. We can help and often work for free, email us to ask. See the contact detail on our page.
For more of my designs check out my website: https://3domcontact.wixsite.com/3dom
I had the idea that I wanted to test my new Prusa Azure Blue filament.
I downloaded the skull from somewhere(very sorry that I can't recall where), simply had to slice the back of at he desired angle and make a hole for a magnet.
I have updated it since then to add the cut off horns as pen/pencil holders and the pentagram I thought added a nice character to it.
I have a Prusa Black with metal flacks that I am going to print it in next.
The magnet cavity is 21mm wide x 52mm tall x 6mm deep.
I made it to fit a magnet I had lying around.
Print Settings
Printer Brand: Prusa
Printer: i3 MK3
Rafts: No
Supports: Yes
Resolution: 0.15
Infill: 20%
Filament: Prusa PLA Blue Post-Printing
Requires a bit of clean up due tot he number of supports required. But there are no really delicate parts so it is fairly easy, although some bits around the teeth can be difficult.
Assuming you are going to add a magnet for the fridge, you will need to glue that in as well.
I didn't paint mine, but I rendered it in Fusion 360 to get an impression of what I might do if I reprint it.