1 / 3
Timing Belt Pulley GT2 60t 6mm sleeve for 20t pulley for Voron Micron — zdjęcie 1
1 / 3

Timing Belt Pulley GT2 60t 6mm sleeve for 20t pulley for Voron Micron

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Timing Belt Pulley GT2 60t 6mm sleeve for 20t pulley for Voron Micron Inspired by https://www.printables.com/model/14587

Ocena
0 / 5
Polubienia
31
Pobrania
256
Wydruki
0
Wyświetlenia
1140
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Non Printed parts needed:

* 5 x M3x8mm flathead screw (https://de.aliexpress.com/item/4001338395909.html)
* GT2 20 tooth pulley 6-7mm width with removed cap (https://de.aliexpress.com/item/4001338395909.html) (You can remove the caps yourself very easily)

This 60teeth belt pulley for 6mm belts is a cheaper alternative to the relatively expensive full aluminum pulleys.

This pulley needs a beheaded aluminum/meta GT2 20 tooth pulley as a core element. It will be fixed with 5 M3x8mm flathead screws.

I use these for Micron - z drive idlers. (The pulley from reddit that served as inspiration pully from the reddit thread does not fit in the voron z drive.)

I will report on durability when they have some more duty hours on my printer :)

I would suggest to print these in ASA or ABS and 100% infill. I would not recomment using PETG or PLA. They will be under heavy duty and any flex will result in weird behaviour.