Buick Enclave/Chevy Traverse/GMS Acadia Upper Storage Latch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Upper Storage Compartment Latch slider for this model often breaks apart. This is a slide-in replacement.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 1282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Wife's Enclave upper storage compartment latch broke down, I 3D scanned the pieces and recreated in F360. I printed with .4 nozzle at pretty much default settings. I added a handful of small paint-on supports to keep the rails from warping and they break off pretty easily.
After printing and cleaning off the supports, I used an emory board to smooth out the gap between the bottom two rails. I then cut a small piece of make-up sponge to act as a spring and glued to the V-shaped gap on the back. This keeps the latch pressure out and the lid engaged.