Cups for Grabber Pickup Tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement grabber cups for pickup or reaching tool
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 473
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
These were made for the Gopher Pick Up & Reaching Tool for a relative. One of the cups disappeared from the grabber so I made a replacement set for it. Since I made it from TPU it is flat across the surface. I have yet to try to use supports on TPU. Not sure how well it would work. Since I made them a long time ago. I am guessing on some things. I believe the hex in the cup for the nut is 3mm.
Used generic TPU filament, fairly stiff. 20% infill, no retraction, Since it is like a hard rubber I might suggest gluing something on the pads for better grip. I looked on the Harbor Freight website and their grabber looks very similar.