Win & Win Black Wolf Accutune Rest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recurve Bow Rest for use with "The Push" Accutune. I have provided both right and left handed versions. The plate…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 747
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Recurve Bow Rest for use with "The Push" Accutune.
I have provided both right and left handed versions.
The plate works for both.
Because of the multiple compound curves involved with this model, you may need to do some filing of the back and base to get the fitting correct.
I attached mine using a couple of strips of hot glue after cleaning the bow and rest with isopropyl.
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.1 or better
Infill:
100
Filament: 3D Fillies PLA + Black
Notes:
Print orientation was with the vertical plate flat on the table.rnYou will need supports from the bed only.rnrnrnIf your slicer permits - use supports from the bed only.
You will probably need to file the back (vertical) side where the supports were to make a good fit to the bow.rnrnI also did a bit of smoothing with 1000 wet and dry.
How I Designed This
Object was designed using Fusion 360.rnSliced using PrusaSlic3r.rnPrinted using Cocoon Create Touch (Wanhao Duplicator i3 Plus).
Category: Sport & Outdoors