Win & Win Black Wolf Recurve Bow Rest
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple recurve bow rest for my Win and Win Black Wolf. I have provided both right-rand and left hand versions
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 103
- Wydruki
- 0
- Wyświetlenia
- 718
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A simple recurve bow rest for my Win and Win Black Wolf.
I have provided both right-rand and left hand versions at different standoff distances.
I have found that the 10mm standoff distance is appropriate for arrows around 7.65mm dia.
Please ensure your limbs are aligned, and the point of the arrow is about 1/2 arrow width to the left of the string( for right hand shooters) when fitted to an undrawn bow.
Print Settings
Printer Brand:
Wanhao
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.1 or better
Infill:
100%
Filament: 3D Fillies PLA + Black
Notes:
You only need supports from the bed (not the part).
I print using with the large vertical side flat to the bed.Post-Printing
Due to the number of compound curves, you will probably need to do some filing where the supports were to get a good fit to the bow.
I finished mine with 1000 wet and dry.
I attached it to the bow using a couple of lines of hot glue after cleaning everything with isopropyl.
How I Designed This
This part was designed in Fusion 360, sliced with Prusaslic3r, and printed on a Cocoon Create Touch (Wanhao i3 plus).
Category: Sport & Outdoors