Siku toy tractor front crate / Siku Spielzeugtraktor Frontkiste
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Front crate with lid using M3 screw and nut for siku toy tractors / Frontkiste mit Deckel für Siku Spielzeugtraktoren
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 440
- Wydruki
- 4
- Wyświetlenia
- 2884
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Functional and usable chest for Siku toy tractor front hitches or even back hitches when using my front to back adaptor! The chest is designed to be printed with a 0.4mm nozzle at 0.2mm layer height. I advise to print at 100% infill with 2 or 3 perimeters. Some support material is needed to print the overhang at the hitch. This design needs 2 M3x10 screws and nuts, preferrably locknuts to “tension”. I made one variant that uses a printed spacer to allow for easier lid operation. The other one is designed to use a standard 0.5mm thick M3 washer in between the box and lid.
Funktionelle und bespielbare Forntkiste für Siku Spielzeugtraktoren. Kann in der Frontaufnahme oder im Heck mit meinem Adapter angebracht werden. Die Kiste ist idealerweise mit einer 0,4mm Düse und 0,2mm Schichtdicke zu drucken. IFür maximale Stabilität empfehle 100% Füllung und 2 bzw. 3 Wandschichten zu nutzen. Für die Aufnahme wird etwas Stützstruktur benötigt. Zur Montage werden 2 M3x10 Schrauben und Muttern, bevorzugt Sicherungsmuttern benötigt. Eine Variante der Kiste hat einen gedruckten Abstandshalter um das Öffnen zu erleichtern. Die andere Variante benötigt eine standard 0,5mm dicke M3 Unterlegscheibe zwischen der Kiste und dem Deckel.
Hitch adaptor / Aufnahme Adapter:
https://www.printables.com/model/382861-siku-toy-tractor-hitch-adaptor-siku-traktor-adapte