DXRacer Chair Armrest Height Locking Mechanism
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If your DXRacer chairs armrest is dropping to the bottom this may be the part you need.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 1
- Wyświetlenia
- 335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
*** In Version 2 I changed the angle of locking mechanism and increased the size of pin hole a bit for better fit.
If your DXRacer chairs armrest is not staying in any position except bottom this may be the part you need. This locking mechanism is responsible from holding the armrest in the desired position. If it is broken (which is what happened in my case) your armrest will drop to the bottom most position. Unfortunately Replacement part is not available in the market. Printing is very easy and takes approximately 1 hour. Use high infill percentage as it is a structural part.
Here is how to change the part. https://youtu.be/XUovvy1UMFc
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.2
Infill:
60
Filament: Esun PLA+ Black
Notes:
Easy and straight forward printing. Use high infill as it is a structural part.
Category: Parts