Five33 Switchback Micro Lollipop mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple mount for the Five33 Switchback holding a Foxeer Micro Lollipop antenna.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 360
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
A simple mount for the Five33 Switchback holding a Foxeer Micro Lollipop antenna. The antenna is inserted through the slit on the bottom and held in place by fixing it to the frame's standoffs instead of puting it over the top plate as with my other design.
The antenna is angled at 40° so that when you fly a camera angle of 50° (like I do), it will be perfectly vertical when the camera image is level, giving you the optimum transmission pattern.
Design
I designed this thing for a Switchback Zero frame but I guess the rear standoffs are the same distance (20mm) as with the pro version of the frame.
The design is intentionally similar to the other antenna mounts provided by Five33 themselves.
Printing
I would recommend printing this thing just as it comes in the STL.
Supports are recommended as 40° overhangs are not very easy to print in TPU.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament: Amazon Basics TPU Red