Curtain holder ring, 70mm and 45mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It is an open ring, which easily hold curtains. Can be attached to the curtain and hold by rubber band.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 638
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
This is curtain holder ring, which easily hold curtain.
This is modified models from bos's ( https://www.printables.com/model/358585-curtain-holder-ring-90mm/files ).
The original one is larger diameter for curtains in my house. Then, I designed smaller one. And puts holes of 3mm diameter for hanging rope and hooking rubber band.
If you are using voluminous curtains, I recommend the original one, which have an inner diameter of 90 mm.
Two size of models:
- Inner diameter about 70mm: curtain-holder-ring-f75b.stl
- Inner diameter about 45mm: curtain-holder-ring-f50b.stl
ID 70mm is suits for ordinary curtains.
ID 45mm is suits for lace curtains.
Print Settings:
- Material: PLA, PETG. whatever.
- Layer height: 0.2mm.
- Supports: no supports
Typical amount of filament and printing time:
- It uses 8.69g filament and can be printed in 44m for 45mm ring.
- It uses 13.53g filament and can be printed in 1h9m for 70mm ring