Bondtech BMG mount for Creality CR10 Ender 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Creality Ender and CR10 90º mount for BMG and stock Extruder
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 445
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The standard CR10 mount for my BMG extruder fouled with the lead-screw nut. This part hopes to rectify that issue. This part can also be used to rotate the stock extruder 90º.
I made the recesses for the nuts a tight fit, so you'll need to press them in with pair of pliers or a hammer and a suitable tool.
The stepper motor should also be a snug fit.
Update: 2023-02-05
I've updated the design to make it easier to print and increased the tolerance for the screw holes. Increased the thickness of the mounting part so that the screws don't bottom out on the stepper
Requires:
4 x M3 nuts
4 x M3 * 8 screws
Notes:
PLA seems to be plenty strong enough, it took a lot for me to break an earlier revision.