Paint Rack for Pentart/LaBlanche Colors
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In order to organize my color chaos a bit, I needed a rack to store my colors neatly. My Pentart and LaBlanche paints…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 413
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
In order to organize my color chaos a bit, I needed a rack to store my colors neatly.
My Pentart and LaBlanche paints in particular presented as a challenge as I couldn't find a suitable storage alternative. So I designed a corresponding rack.
I developed the rack for an xTool D1 and chose 3mm MDF for material.
The rack is intended as a pure plug-in system and does not require any glue or anything similar.
To build the rack you need the following cuts:
2 x Wall Element
4 x Shelf Back
4 x Shelf Base
2 x Side Element
At this point, I will not provide assembly instructions because it is self-explanatory.
If not, you should maybe find another hobby. :)
I will also provide a printable alternative for larger printers (CR 10 max, Chiron, etc., min 400mm), but I will not test it because I think the lasered alternative is better.
If you print it, please let me know if it fits. I would do it in PLA to take advantage of the rigidity of the material.
Happy printing.