54mm Tamper Station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on AliExpress Tamper Station: https://www.aliexpress.com/item/1005004327712555.html It all based on my Breville…
- Ocena
- 4 / 5
- Polubienia
- 27
- Pobrania
- 183
- Wydruki
- 1
- Wyświetlenia
- 2339
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Based on AliExpress Tamper Station: https://www.aliexpress.com/item/1005004327712555.html
It all based on my Breville BES840BSS machine and Bravo Tamper and Distribution tool by Gilberto
It has a 3mf file compatible with Prusa Sclicer with the infill modifiers.
I use:
5% for general infill
15% for the tampimg section
10% to make a a solid base for the holes, but just few layers and the Portafilter support
To mount the portafilter ajustment, use a M3 nut and screw (it fits up to a M3x16 screw)
The Tamping section can fit the standard Breville portafilter and a bottomless portafilter for the same machine (it is a bit bigger than the standard one)
You can clue the Ajustment piece to the screw head
I recommend to use some rubber pads at the botton of the Tamper Station and at the top of the portafilter holder. Add some EVA foam to the botton of the holes
This PDF file https://files.fm/f/zjxvz4zcb is a good template if you want to cover the piece with some "wood-like" adhesive/cover
Print Settings
Printer:
GTMax Core A1 V1
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
5% / 10% / 15%
Filament:
3D Fila ABSCategory: Kitchen & Dining