Tronxy X5SA bed side filament bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament bin beside the bed to easily sweep unwanted filament off the bed to the side.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 361
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Saw a few filament bin designs for other 3D printers but didn't see any for this model, so this is my take on how to collect unwanted filament bits easily.
Able to put on either side of the bed frame.
The green piece is PLA, and the silver is PETG. I started seeing the PLA-printed part warp after printing with the bed at 110 deg C in a somewhat enclosed condition. PETG is fine.
I have reprinted it in blue ABS and will update here if PETG starts warping.
I have some bridging issues that can be resolved with better settings and/or cooling.
*****
Clicking on my affiliate links below will give me a small kickback
if you purchase something. (at no extra cost to you)
AliExpress affiliate link:
https://s.click.aliexpress.com/e/_DmpFxU1