Stove pot stand, silicone crn pad.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mold is to make replacement silicone pads for specifically a ELBA gas stove pot stands. But may very well work on…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 116
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This mold is to make replacement silicone pads for specifically a ELBA gas stove pot stands.
But may very well work on others.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
25%
Filament: Wanhao PLA What ever takes your fancy
Using the mold.
After printing no work should be needed on the mold.
Sprayed the mold with "spray an cook" as a releasing agent.
Filled the mold with black silicone .
Smoothed it with a paint scraper.
Used ordinary silicone from a caulking tube.
Allowed it to cure, a few hours, then peeled it out of the mould.
Repeat until have as many as needed.
Cleaned pot stand bottom corner with solvent and use a dot of silicone to glue made pad to the stand.
How I Designed This
Fusion 360
Category: Kitchen & Dining